SB-FireFly Hacks: Round 1

Dave Hrynkiw
July 3, 2012

Jeremie, our engineer and the brains behind the SB-FireFly, can't seem to put the thing down even though it's all done and released. He's been hard at work figuring out what it's capable of, and figures that the hardware and framework could be used for a Micro-TV-B-Gone broadcaster, IR code repeater, and even a tiny robot controller. This week, Jeremie turned the SB-FireFly into a countdown timer and even a 'Twinkle Grenade'. Check out the hack descriptions below for more information.


SB-FireFly Countdown Timer
The inspiration for this hack comes from a certain Solarbotics Head-Geek burning up too many Freeduinos in the re-flow oven... I mean, we had trouble cooking hardboiled eggs... yeah… that's it. A permanent 3 minute timer was needed to save the innocent PCBs... er... eggs.

Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND).

Code: Download here

What it does:
Turns an LED on then beeps at the 1 minute mark
Turns 2 LEDs on and beeps at the 2 minute mark
Turns 3 LEDs on then continuously beeps & flashes all LEDs at the 3 minute mark until the button is pressed.

Meanwhile, during the countdown mode if the button is pressed it will restart the countdown from the beginning. During the continuously flashing/beeping behaviour the button will put the SB-FireFly to sleep, and if pressed again it’ll restart the countdown.

Application: It can be modified to be a timer of any sort, reminding you at certain intervals to take action such as pulling PCBs out of the oven eggs out of the pot.


SB-FireFly Twinkle Grenade
The inspiration for this hack comes from either the desire for mischief or the need for chip tunes. One of the two. Okay, maybe both.

Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND)

Code: Download here

What it does: Continuously plays Twinkle Twinkle Little Star and flashes all the LEDs in time with the notes until the button gets pressed. Upon button press, the SB-FireFly goes to sleep (because, unfortunately, no amount of Twinkle Twinkle Little Star makes electronics fall asleep). Push the button again and the tune will start back up where it left off.

Application: Annoying your friends, family, and co-workers. Throw it in a colleague’s office and run away as they frantically search the floor trying to turn it off (we swear we haven't done this at all…). Or you could be sneaky and hide it in a vent or inside a drop ceiling. Magnets stick quite well to the back of the SB-FireFly, so it can then be temporarily attached to a metal surface quite easily.


With the sheer plethora of possibilities for the SB-FireFly (or 'hacklications', as Jeremie likes to call them), there'll probably be another one or two similar posts on the horizon for how to tweak this mini blinky platform extraordinaire, so stay tuned!

MORE POSTS

December 6, 2004
ScoutWalker III sold out!

Sorry to say that our initial inventory of the ScoutWalker III has sold out! We're trying to get more ready for Christmas, but no promises...

September 18, 2003
Solarbotics at RoboMaxx, Robothon

We're making the trip out to Robomaxx in Grants Pass, Oregon October 11-12. Gonna be there? Hunt down the dude in the cowboy hat wearing the "Solarbotics" Shirt. That'll be me. Maybe I'll have samples of our gearmotors burning a hole in my pocket. If it isn't me, tell him to give back my hat […]

July 26, 2013
Friday New Product: BusBoard Protoboards

Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise. PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard $3.75 A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects! PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard $6.82 For the ultimate in protoboard flexibility, here's […]

December 23, 2008
'Twas the night before Christmas...

'Twas the night before Christmas and all through the shop Not a creation was stirring (except the Turbot!). All robots had been packed and shipped with care, With hope, to their destination, they soon would be there. The bosses and staff were heading home straight To settle down to gift wrapping, probably 'til late. When out […]

1 3 4 5 6 7 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.