SB-FireFly Hacks: Round 1

Dave Hrynkiw
July 3, 2012

Jeremie, our engineer and the brains behind the SB-FireFly, can't seem to put the thing down even though it's all done and released. He's been hard at work figuring out what it's capable of, and figures that the hardware and framework could be used for a Micro-TV-B-Gone broadcaster, IR code repeater, and even a tiny robot controller. This week, Jeremie turned the SB-FireFly into a countdown timer and even a 'Twinkle Grenade'. Check out the hack descriptions below for more information.


SB-FireFly Countdown Timer
The inspiration for this hack comes from a certain Solarbotics Head-Geek burning up too many Freeduinos in the re-flow oven... I mean, we had trouble cooking hardboiled eggs... yeah… that's it. A permanent 3 minute timer was needed to save the innocent PCBs... er... eggs.

Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND).

Code: Download here

What it does:
Turns an LED on then beeps at the 1 minute mark
Turns 2 LEDs on and beeps at the 2 minute mark
Turns 3 LEDs on then continuously beeps & flashes all LEDs at the 3 minute mark until the button is pressed.

Meanwhile, during the countdown mode if the button is pressed it will restart the countdown from the beginning. During the continuously flashing/beeping behaviour the button will put the SB-FireFly to sleep, and if pressed again it’ll restart the countdown.

Application: It can be modified to be a timer of any sort, reminding you at certain intervals to take action such as pulling PCBs out of the oven eggs out of the pot.


SB-FireFly Twinkle Grenade
The inspiration for this hack comes from either the desire for mischief or the need for chip tunes. One of the two. Okay, maybe both.

Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND)

Code: Download here

What it does: Continuously plays Twinkle Twinkle Little Star and flashes all the LEDs in time with the notes until the button gets pressed. Upon button press, the SB-FireFly goes to sleep (because, unfortunately, no amount of Twinkle Twinkle Little Star makes electronics fall asleep). Push the button again and the tune will start back up where it left off.

Application: Annoying your friends, family, and co-workers. Throw it in a colleague’s office and run away as they frantically search the floor trying to turn it off (we swear we haven't done this at all…). Or you could be sneaky and hide it in a vent or inside a drop ceiling. Magnets stick quite well to the back of the SB-FireFly, so it can then be temporarily attached to a metal surface quite easily.


With the sheer plethora of possibilities for the SB-FireFly (or 'hacklications', as Jeremie likes to call them), there'll probably be another one or two similar posts on the horizon for how to tweak this mini blinky platform extraordinaire, so stay tuned!

MORE POSTS

October 12, 2012
New Product: Arduino WiFi Shield and Dis...

The lonely product in the long-time-ago previous product post has filed a complaint to the INPDL (International New Product Defendant League) against having to represent the Friday Product Post by itself for an entire month. We therefore had to comply by bringing in some new stock to switch out. So here's an Arduino WiFi Shield […]

April 27, 2005
New Solarcell, the SCC2433a

In our continuing quest to find the successor to the Sunceram throne, we invite you to welcome the SCC2433a solarcell! It's the little brother to the SCC3733, with similar polycrystalline & epoxy construction. It's quite the power-house in direct sunlight, but be warned - the cell arrangment is skewed in favour of current generation, not […]

September 7, 2012
New Product: Adapters, OLEDs and Financi...

In my recent wanderings in the world of overly-cheerful financial advise, I stumbled upon this budgeting theory that says that to feel comfortable about your moneys, or lack thereof, you gotta be living on your last month's earnings. Let's leave out the question of how anyone would pull it off, and just say that I […]

May 4, 2012
Credit Card Woes

Thanks to some information provided to us by a very determined customer (Thanks Erin!), we've been able to pin down why some of your credit cards were being declined. We've been able to correct and verify that this bug has been resolved, so those of you who have been declined while using an otherwise valid […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart