RW2i - Internal mount, and new shaft hol...

Dave Hrynkiw
May 6, 2007

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.

We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.

We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.

Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!

MORE POSTS

December 5, 2003
Catalog glitches...

Grrr... Time to start handing out the 1000 lashes with a wet noodle. There's a few pricing errors in the new catalog 6: The RM2 motor is not 2 for $10.75/ea CDN - it's 1 for $3.40 or 2 for $2.85/ea CDN The SC2422 solar cell is not 2 for 2.55/ea USD - it's 2 […]

February 15, 2011
Hakko FA-400 Smoke Absorber

It's cool. Well, not quite. But it's smoking. Umm,  that's not right, either. It's anti-smoking. Whoever redesigned their 493 smoke absorber did a pretty good job - it's much better than it was before! And Hakko even posted a cool video showing how good it is (sorry, can't embed the video here).

June 25, 2013
Back on Track

Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!

June 17, 2003
Escaps back in stock!

Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]

1 85 86 87 88 89 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart