We just got the PDF documentation up for the SunSwinger, so you'll see it listed as a resource under the SunSwinger product info page. Hope you all enjoyed April Fool's. The Spazovore was only a partial joke - anybody who ordered one will be receiving one!
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Golem at Calgary Comic Expo
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem. Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving. Alternately, since we first worked on the Golem, we've been […]
The Solar Marble Machine
... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!): Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered […]
Lower gear ratio motors!
We're happy to announce another variant of gearmotor. Like the GM2/GM3 but with a gear ratio of 143:1, they run approximately 175% the output speed! - these are ideal for applications like minisumos, linefollowers and other wheeled devices. Check the "New Items" listing on the left side for details, or view them directly here: GM8 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.