We have a pretty darn big announcement for you today: we're now distributing Open Beam! It's a new handy-dandy construction system that got its start from Kickstarter, and is gaining a lot of immediate support. Right now, we're stocking all the items except for the kits, which we'll probably bring onboard in the near future. […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
ScoutWalker III - limited stock!
We've managed to dig up enough parts to get six ScoutWalker III's together in time for Christmas. We'll have them ready by the end of the week for shipping, so if you don't mind waiting for your order to go until then, feel free to pre-order now!
Tips & Tricks Working with Thermopl...
Today we are going to be taking a look at one of our favorite go-to materials for easy molding and quick repair, Caprolactone Thermoplastic! This plastic, more commonly known as ShapeLock, Friendly Plastic, Instamorph or Polymorph, is a biodegradable polyester with a low melting point. When solid, it has physical properties of a very tough, […]
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.