It appears February 14th is almost upon us, and it's an event that holds emotional significance to the very fibre of our souls. So to celebrate GPS Day (or Oregon Day or Death of the First Cloned Mammal Day or First Serbian Uprising against the Ottoman Empire Day or Department of Commerce Day) we decided […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Friday New Product: LilyTwinkle, Teensy ...
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
Junkbots is back online!
So, I writes this book, see? And it sells pretty good, so in November, I orders more books, see? And they says "HEY! We gots none left - calm down, we're printing more". So, I sits and waits, and FINALLY they comes in! Here's the great part: It looks like this is the new printing, […]
New Products!
We've been busy gathering new BEAM products, and now with the release of the new website engine, we're able to finally post them! New: CP.047F - 0.047F 5.5V capacitors CP10F - 10F 1.6V capacitors (return of an old favourite!) MCM2 - a new metal cassette mechanism with very cool parts VPM - a tiny disk […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.