The Wearable Tech Gala MakeFashion 2015 at the Telus Spark Science Centre is fast approaching, but there is still some time to get your tickets. It's been 3 years and the event is getting bigger and better, and we are looking forward to seeing the new creations, some of which are coming together with the […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Make Magazine! Servo Magazine!
Woot! (Ok, I know it's spelt W007) The Sumovore is featured in volume 4 of Make Magazine in their suggested shopping list! For those of you who don't know about this killer quarterly publication from the fine folks at O'Reilly & Associates, you have to check it out. Makezine is ideal for all you DIY […]
Fire Stuff, Light Stuff, New Stuff
We don't know about you, but we're ushering in the New Year with a BANG. That's the sound our metaphorical sledgehammer of rage made while we beat the snot out of our internal server this week, after it refused to come into 2012 in an operational status. Fortunately, our crack IT squad has patched up […]
Solarbotics WCRG mini-sumo workshop
The night before WCRG, and all through the office, not a creature was stirring...except two dozen mini-sumo robots - AAAHH! Thanks to Alberta Printed Circuits, we were able to sponsor a mini-sumo workshop to build 24 robots to compete in the next day's Western Canadian Robot Games.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.