Happy October everyone! The leaves are falling and there's that crisp scent of winter lurking in the air. Ah, it sure is beautiful! And you know what else is beautiful? Diodes and trimpots, of course. Check out these gorgeous new components: 3.4V Zener Diode 5.1V Zener Diode 1k Single-Turn Trimpot w/ Knob 10k Single-Turn Trimpot […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Monday New Product: Sound, Powerboost an...
The alien flying badgers invaded the office, so the Friday product release was postponed. It is Monday, and the badgers are tamed and put to work to bring you more product than ever: A4988 Stepper Motor Driver Carrier, Black $7.49 It's an upgraded version of the standard A4988 stepper driver module from Pololu. Adafruit Audio […]
ECRG BEP Walker success!
It comes to our attention from J Wolfgang Goerlich that he won the ECRG Walker competition with the "Servocore Walker" he built from a project in our "Bicore Experimenter's PCB" bundle! See more details about his walker here.
New Kit: Type-1 Solarengine Re-issue
It's been a while since we've had this kit online, but due to some diligence we've found materials to update and re-issue it! Using the licensed "MillerEngine" (which we find to be a substantial improvement over the old Solarengine), we've changed the kit with a new black circuit board and updated documentation. Check it out […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.