We have a pretty darn big announcement for you today: we're now distributing Open Beam! It's a new handy-dandy construction system that got its start from Kickstarter, and is gaining a lot of immediate support. Right now, we're stocking all the items except for the kits, which we'll probably bring onboard in the near future. […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Active Tech Mail-Out and COVID-19 Polici...
Hey Everyone, Sometimes the stars align and everything goes right... however, this was not the case for our recent sales flyer. Despite our best efforts to cancel/delay/time travel, it was sent out to the local Calgary area today. While we are still honoring the sale (with an extension until April 12th while supplies last), we […]
New: The L293D and GM4 motor!
New products added to our inventory include the L293D motor driver IC (a staple chip used in small-robot building), and the new clear-case GM4 servo gearmotor! No electronics, just a full 360° rotating, strong, modified servo! Check out the "New Products" link on the left toolbar for pricing and details.
Jemez Valley BEAM Workshops
Kurt Moore of the Los Alamos National Laboratories has been busy using BEAM technology to bring technology training to the local schools in the Jemez Valley. Here's what one class did!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.