Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
The Solarbotics GraviTrack Marble Machin...
Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top compact but large enough for easy mechanical assembly. Pre-order yours […]
New Vibe Motors!
We've finally come upon a suitable replacment for the venerable, discontinued VPM vibrating pager disk motor. Ah, it was a splendid device, but it sure was easy to break those motor leads... Ah! But the new VPM2 has wires prebonded to the motor, and it's slightly smaller too! We welcome our new vibrating disk motor […]
Tilden Interviewed about new 'bots
We know we don't have anything directly related to RoboSapiens (other than gear motors), but as we're tight with Mr. Tilden, and he's the father of BEAM technology, it's always worthwhile to report useful bits about him. There's presently an interview with him at you-review.com - take a boo! (Then come back and do more […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.