RW2i - Internal mount, and new shaft hol...

Dave Hrynkiw
May 6, 2007

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.

We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.

We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.

Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!

MORE POSTS

August 18, 2012
New Product: Limerick Edition

I've been wanting to post in limerick, and today I think I'll give it a kick. My co-workers think it's dumb, but I think it's kinda fun. And I'm sure it'll turn out quite slick. In order to avoid some tough restrictions, I won't use limerick for product descriptions. It'd also make some people sick, […]

September 22, 2006
GM15s back in stock!

Sorry about the delay in making these available. These tiny 25:1 pager-sized gear motors are difficult to get built. BUT, we finally have more GM15 gearmotors in stock!

May 15, 2003
WCRG Finished!

Thanks to all that came out to the robotgames last weekend, and our Solarbotics / APCircuits Mini-sumo workshop on Friday night! We kicked...erm...said good-bye to the last participants at about 2 in the morning! Fun was had by all! Expect pictures soon... Regards, Dave

July 8, 2013
Project Monday: Gilroy's ErgoGP

Since we've been slacking for awhile on our Project Monday, I thought I'd share a project I've been working on the past couple of weeks. Being the office code monkey, I spend a lot of time in front of a keyboard. This has led to a fair amount of discomfort and sparked a quest for […]

1 31 32 33 34 35 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart