Ah, it's here! Featuring the Atmel Mega8 processor, this brainboard offers pretty powerful features. Check it out!
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
ScoutWalker III Prototype Kit Workshop
Steve Jones over at Bug'n'Bots has been working with us to be our official test-base for our new upcoming BEAM Walker Kit - the ScoutWalker III. In preparation for the 2004 Eastern Canadian Robot Games, Bug'n'bots is hosting a special workshop featuring this new beta-version kit. This new robot kit uses a very comprehensive BEAM […]
Didel Gears, LilyPad
Alriiiight. This week we've got a small handful of new plastic pinions (not to be confused with plastic onions) from Didel. These little units are great for sliding onto pager motors and mating to other gears. 0.71mm 6-Tooth Pinion 0.81mm 9-Tooth Pinion 0.78mm 12-Tooth Pinion 0.82mm 12-Tooth Pinion And, as promised last week, we've got […]
20 Years of BEAM Technology
A little while ago we received an email from an observant Mr. Pavel Ryabinkov, the site-admin of www.myROBOT.ru, who was asking us to relay a question to Mark Tilden: Could you answer, can it be considered the official date of birth BEAM-robotics November 10, 1989?I was basing this question on the message Brian O. Bush: […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.