Well, that magical time of year where rabbits poop magical chocolate eggs is almost upon us. And, as usual, Solarbotics will be closed for Good Friday, on April the 2nd. This'd be where we talk about how you can still send emails and submit orders, and that we'll answer any correspondence/messages and resume processing/shipping orders […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
New Product Friday: Arduino Yun and Thre...
Today is Friday. Lets celebrate by using only green towels and omitting the letter R. Or just seeing what new stuff we got: Arduino Yun $71.95 Take a wireless router-on-a-chip, and stick an Arduino Leonardo to it - that's the new Arduino YUN! Evil Mad Science The Three Fives Kit $35.00 Take a venerable 555 […]
Vibebots for fun
We do some stuff around the office just for fun once-in-a-while. One of these projects resulted in this set of Vibebots, built by Grant McKee. Simple, a bit noisy, but FUN!
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.