Just in time for Christmas! This is truly one of the better beginner books about robots. It's a great gift idea... Read More...
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Friday New Products: Microphone Accessor...
New product for your attention: Electret Microphone Breakout $7.95 Audio sensors & mics have to be amplified just right for best response. Here's a tidy unit engineered by Sparkfun to make adding an electret mic to your project easy. MEMS microphone board $9.95 Newer MEMS microphones give much better response than older style electret mics, […]
Cool project
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it: Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ […]
New Gearmotors!
We're very excited to announce these new "baby" versions of the popular GM2 and GM3 gearmotors. These junior versions offer a 120:1 gear reduction ratio, built-in safety clutch, and 146rpm with 20in*oz torque at 5V drawing onlyh 90mA (620mA at stall). Take a look at them in the motors section of our website! The new […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.