We've managed to dig up enough parts to get six ScoutWalker III's together in time for Christmas. We'll have them ready by the end of the week for shipping, so if you don't mind waiting for your order to go until then, feel free to pre-order now!
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
New Instructables!
Our clear breadboard was recently blogged on Makezine, which reminded me we juuuust about had an instructable ready for that same item. So, a few hours later, it is finished and posted. And while I was at it, I finished editing another Instructable by Jerome Demers, our intern. He did up a DIY Miniball instructable […]
New Distributors
Solarbotics would like to announce two new distributors, one in Italy, and the other in Mexico (who says robots aren't cool world-wide?): Robot-Italy is now our dealer out of the ancient city of Rome. We hope to visit them there one day! Our other new distributor is Robodacta, out of Mexico City. Another nice, warm, […]
Wednesday Links: Transparent Aluminum, G...
Transparent Aluminum Well, technically not exactly aluminum, but aluminum-based ceramic called aluminum oxynitride. Still with quite magical properties. (Via Makezine) Concealed Layers of Product Life Renee Verhoeven's grad project explores the relationship between anatomy and mobility in the series of gloves, using laser cutting. (Via Mocoloco) Asian Snack Enamel Pins These lovely pins by giantrobot.com […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.