Just another quick note that Solarbotics will be closed for Victoria Day, Monday May 23. Any orders received after 2pm today will not go out until we open back up on Tuesday the 24th.
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
Just another quick note that Solarbotics will be closed for Victoria Day, Monday May 23. Any orders received after 2pm today will not go out until we open back up on Tuesday the 24th.
From a post we just received from Roberto Avil
Alriiiight. This week we've got a small handful of new plastic pinions (not to be confused with plastic onions) from Didel. These little units are great for sliding onto pager motors and mating to other gears. 0.71mm 6-Tooth Pinion 0.81mm 9-Tooth Pinion 0.78mm 12-Tooth Pinion 0.82mm 12-Tooth Pinion And, as promised last week, we've got […]
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.