Grrr... Time to start handing out the 1000 lashes with a wet noodle. There's a few pricing errors in the new catalog 6: The RM2 motor is not 2 for $10.75/ea CDN - it's 1 for $3.40 or 2 for $2.85/ea CDN The SC2422 solar cell is not 2 for 2.55/ea USD - it's 2 […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
New BIOBug Footage
We've just recently been given the go-ahead to unveil more Wowwee BIOBugs - the toy that Mark Tilden had direct involvement in! This is footage we shot while down in New Mexico this Spring at the 2001 LANL workshop. The first video shows the BIOBug Beetle's ability to maneuver and respond to obstacles. The second […]
Wednesday Links: Flashlights, Lanternbot...
Spring this year seems to be short on sunshine. To compensate for that, today's post is full of shiny things. And butterflies. Butterflies are always a good addition. Tilt Beam Flashlight Cute build, a diffuser of some sort would be a nice addition though, unless used for interrogation purposes. (by [Zach DeBord], via Hackaday) Soft […]
Solarbotics at the MAKER FAIRE
We are going to be at one of the two coolest shows on earth, the San Francisco Bay Area MAKER FAIRE! (The other coolest show is the Austin version!) So we are packing up shop and heading down to beautiful California where it's warm and not snowing! If you are in the area, have a […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.