RW2i - Internal mount, and new shaft hol...

Dave Hrynkiw
May 6, 2007

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.

We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.

We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.

Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!

MORE POSTS

October 25, 2005
Pogo Pins are back!

After a long hiatus, our PP3 chisel-tip pogo pins are back! And it looks like they're here to stay, so no more drop-outs in supply. I know that we use them for robotics applications, but there's a lot of people using them for other electronics purposes. Now you can get them reliably, and in quantity, […]

May 31, 2001
LANL 2001 Pictures and other Website stu...

We have pictures from the Los Alamos National Labs Workshops! Check them out under the Gallery heading, or at the bottom of this post. We are having temporary difficulties with our Solarbotics.net server, eliminating the ability to read PDF files or downloads. This should be rectified soon. Also, in the transfer process, everyone who asked […]

July 3, 2015
Friday New Product: Kossel Accessories

Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]

April 3, 2009
PICAXE Experimenter's Kit on sale!

Well, we're disappointed. Not a single one of you fell for our Pimp Your Sumo April Fool's joke.  Which is too bad, really, because we were actually ready to send them out to anyone that wanted one. Oh well, too late now! But don't fret if you missed out - we have a special treat […]

1 15 16 17 18 19 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart