Earlier in January we had a very interesting discussion with the chief geeks at Evil Mad Scientist Labs. They've been doing similarly-unique DIY as Solarbotics for a good long time, but they had now found themselves in the position of shuttering their operation to take some lead rolls with Bantam Tools. This meant moving from […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
Telephone interruptions Scheduled
Now why would we schedule interruptions? Umm... because it gives us time to enjoy a cookie and milk without the phone ringing. Every accidentally dip your headset mic into a glass of milk? It starts to smell funky in a day or two... Anyway, it isn't really our fault - it's just some local infrastructure […]
Jemez Valley BEAM Workshops
Kurt Moore of the Los Alamos National Laboratories has been busy using BEAM technology to bring technology training to the local schools in the Jemez Valley. Here's what one class did!
New Sanyo Gear motors
Wow! They're finally here! These are the original gear motors we used sooo many years ago to convert and power the Miniball kits (yes, they're under review for bringing back - don't rush us!). We're the only place to find the whole assortment of four gear ratios - 75.7, 134.5, 196.6, and 297.1:1 reduction, and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.