RW2i - Internal mount, and new shaft hol...

Dave Hrynkiw
May 6, 2007

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.

We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.

We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.

Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!

MORE POSTS

May 19, 2017
New ESP Offerings at Solarbotics

ESP8266 ESP-32 CAD 13.50/ USD 9.99 The much anticipated ESP32 is here!! Bluetooth, Wifi, Dual Core, IoT just became doable! ESP-12F AP+STA Remote Serial Port WIFI Controller / Module CAD9.38/USD6.95 You can't turn over an internet-connected rock without finding an ESP8266 of some sort wired to it. This ESP-12F AP+STA is a solid way to […]

April 10, 2008
Solar Pendulum of DOOOM blogged on MAKE

I love MAKE magazine. I always enjoy reading (then trying) the projects in each magazine. I was a bit disappointed in their last issue where they didn't cover the complete process to make gunpowder, but that's a minor complaint. I just noticed on their blog that they're talking about our Solar Pendulum kit and Christopher […]

June 11, 2004
New! Servo2 and RM1a motors

We've got in an inventory of Grand Wing Servo S03N standard servos. These pack quite a bit of power, and prove to be pretty good for standard servo applications. We're sorry to say that the RM1 is no-more. The RM1 is dead; long live the RM1. (I never understood that phrase...) All hail the RM1a! […]

December 15, 2004
Mark Tilden on CBC Radio

Word is Mark W. Tilden gave CBC Radio a nice interview that'll be aired right after the 10am news on your local CBC station. Not Canadian? Use the internet to your advantage. Use this link to find the station closest to your time zone (or earlier or later if you wish), and tune in!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart