Everyone is familiar with paracord bracelets - the cleverly woven wearable survival device that instantly unravels into many meters of useful and super strong nylon cord in case of necessity. These are useful for outdoorsy types, but what if you are an indoorsy type with a lot of electronic emergencies? Or a geek in need […]
RW2i - Internal mount, and new shaft hol...
Dave Hrynkiw
May 6, 2007
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.
We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw down, you have to remove the tire from the hub, which is a pretty easy process.
We had planned to make the internal cut-out of the RW2i to allow the installation of a GM11a-14a style motor to the open side, but the manufacturing tolerance was a wee off, and we can't quite make them fit. Fortunately, it's a pretty simple process to file the edges of a GM11a-14a motor to make it fit, which has the added benefit of making the brass edges of the gearbox act as brass bushings that assist wheel alignment.
Also new to the RW2 and RW2i wheels is a new hole diameter! We've had many requests for alternate shaft sizes, so we had a limited portion of both these hubs manufactured with a 1/16" pilot hole so you can drill it out to whatever size you need!
MORE POSTS
More of the RS2 and Friends at CES
I just tripped over this article showing off some AMAZING footage of Mark's new creations. Enjoy! Read More...
Dave Hylands is only a marginal friend o...
Although he has purchased from us, and used our products (the "Secret Motor Driver") in his prize-winning minisumo "Stinger", we, as Solarbotics officially declare Mr. Hylands only "marginal" friend. You see, Solarbotics sent a few of our robots to the University of Northern Idaho's mail-in minisumo contest, and again he's served our own tuckus back […]
PumLantern Lantern CC2.5 A-SA released!
Hi All. We've been having such fun with the PumLantern shells, we thought we'd share the love. Download the zipfile with several file formats under "resources" for the K PL kit! It's released under the Creative-Commons Attribution Share-Alike 2.5 Canada license. We use a laser to cut ours out, but there's nothing saying a steady […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.