Robot Costume Hack

Solar botics
October 24, 2016

img_20161011_105711

Since Halloween is just around the corner we've built and published a few projects in order to give some ideas to the DIY costume-inclined folks. One is DIY Halloween RGB LED Kitty Ears and two is Halloween LED Witch Hat.

So for this third hack we started with an online-bought robot costume, but being a creative tech people, we couldn't resist making it better by using some brilliant LED strips that react to sound.

Supplies used:

The Teensy was chosen because it has hardware based Fast-Fourier-Transform optimizations, and lots of memory.

The dense LEDs (144 per meter) were used on the helmet. More spaced apart (30 per meter) were used on the arms. All of them drive from one Teensy receiving analog signal from the microphone located in the helmet. The microphone captures both the voice of the wearer and ambient sounds.

Here's what it looks like reacting to the music:

Technical Build:

The idea was to attach two denser LED strips to the face mask guard and the rest to the arms of the costume. They both would react to ambient sound and light up depending on the frequency of sound. The helmet's strip would have the lower frequencies in the middle and the arms would have them start at the wrists.

The face mask guard took 52 LEDs per strip and arms got 25 LEDs per arm. These calculations are reflected in the code below.

For the arms, I divided each LED strip into two sections (since the costume itself had separate foam pieces for forearm and shoulder), and gave them their own battery.  That allowed me to have a simple 2 pin connection for joining the arms to the helmet.

img_0880

One problem when dealing with RGB Strips on wearables is that the solder pads are small and the wires break off too easily.  I tried to minimize this by adhering a small wooden backing to the end of each strip.  This acts like a cast and, when sealed with heat shrink, immobilizes the connections.  I cut the supports on the laser cutter, but you can use anything.  Popsicle sticks would work as well.

img_08341

Here is the basic wiring diagram I used:

 Wiring for Robot Costume
Wiring for Robot Costume

Software:

This code uses hardware support for FFT that's built into the Teensy.  If you want to use a different processor, you will need to add a FFT library and modify the code accordingly.

I found some code online that was almost perfect for this project. Rather than reinventing the wheel, I reused that code, and modified it for my needs.  Original credit has been left in the code.

Robot Costume Code

Summary:

With Halloween just around the corner, this costume should be a hit at any event.. I can't wait to wear it!

14963128_682570741900621_487933391291499477_n

photo credit Lucky Shot (David Luckman)

MORE POSTS

January 28, 2015
Raspberry Pi Model B+ 512MB Project Boar...

Not being able to wait until the proper Friday New Product post, we are excited to announce that we are now carrying the Raspberry Pi Model B+ 512MB Project Board.

October 24, 2011
RC Brutusbot n' Communication Stuff

Help! It's getting colder outside and the trees are starting to shed all over everything. It's quite a mess. It's pretty, but a mess all the same. So we did what anyone would do in such circumstances - we made a small DIY tank platform wirelessly controllable, released a new breakout board, and put together […]

August 4, 2006
Heritage Day Monday

Monday is Heritage Day here in Alberta, Canada, so we will all be out Heritage-ing it up, and enjoying our all too short summer. So if you want to go all Heritage on BEAM, and buy a SolarRoller kit, we'll ship it to you when we are back in the office Tuesday!

October 30, 2009
Happy Halloween!

You know how I said we'd have new and exciting stuff to show off this week? That isn't quite the case. It's just been one of those weeks, and we don't have anything ready to go for you. But I can say this - we'll be opening up pre-orders for our brand spankin' new Oomlout […]

1 45 46 47 48 49 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart