Resistance is Futile if < 1ohm

Dave Hrynkiw
July 31, 2009

Hey, look at us! We made a witty, over-used joke! But seriously, this week we have a schwack-load of resistors for you. Normally we save most of these for our internal use, but what's so fun about that? So we've gone ahead and opened up our entire inventory of  5% accuracy, 1/4 watt resistors. There are a lot of them. And they can now be yours, so that you too can make lame Borg jokes. Check out the full list of new resistors below. For a complete selection, be sure to check out the Resistors Category.

And one last tidbit! We've put together a Graphics & Logos section, for all sorts of Solarbotics media. There are a few small/simple website banners, as well as some larger, high res and vector logos for those of you who'd like to make something specific. You can access this page by hitting the big Resources button at the top, and then the Solarbotics Graphics & Logos link on the lower-left. So, loyal minions, venture forth and plaster our logo in all manner of extremely awesome places!

MORE POSTS

September 19, 2000
SSK Head to SW2 instructions / schematic...

Still slogging through the backlog of "things to add to the website". One of them is the ScoutWalker/SunSeeker interface instructions, in PDF format (as per usual). So if you want to see exactly how we get the head "talking" to the body, and what the exact circuitry is, come take a look! We also are […]

June 13, 2011
Vancouver Mini Maker Faire

The best part of being a company in Canada is that you don't need to leave the country to go there. That being said, we're going to show some of our fellow Canuck's some lovin' by attending the Vancouver Mini Maker Faire at the Great Northern Way Campus from June 25th-26th.  We'll bring a handful […]

December 19, 2001
Solarbotics Holiday Hours

Well, it's that time of the season to shut down and spend time with the family. Solarbotics will be closing December 21, 2001 at 4pm, and we'll reopen January 3, 2002.

November 17, 2009
3D Printed frame for Line Follower

Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!

1 37 38 39 40 41 254
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.