There's a power failure in our area this morning, so what to do... Hey, let's take the staff out for breakfast! So since the phones are down, the server is down, the lights are out, and there's a sticky-note on the front door saying as much, we're not open. Not for another hour or two, […]
Propellor, Maker Faire
Dave Hrynkiw
May 8, 2009
Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.
But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:
- 63mm (2.5") long
- 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
- 1mm shaft hole diameter (easily drilled out to suit your motor)
It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!
MORE POSTS
Thursday Cool Links
Well, it looks like we somehow managed to walk away from the Maker Faire unscathed. Going to the beach afterwards, though, has left us with some residual sunburns to suffer through. Thankfully, we got to return to some local weather that is wet, grey, and generally miserable. But enough of that! On with some neat-o […]
Project: Switching Beds for a Better Cut
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]
Closed for Labour Day
As you may have guessed, Solarbotics will be closed Monday, September 06 for Labour Day. Enjoy the weather if you're not living in Alberta! We'll continue regular office hours on Tuesday at 0900 MST.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.