Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to […]
Propellor, Maker Faire
Dave Hrynkiw
May 8, 2009
Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.
But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:
- 63mm (2.5") long
- 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
- 1mm shaft hole diameter (easily drilled out to suit your motor)
It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!
MORE POSTS
20 Years of BEAM Technology
A little while ago we received an email from an observant Mr. Pavel Ryabinkov, the site-admin of www.myROBOT.ru, who was asking us to relay a question to Mark Tilden: Could you answer, can it be considered the official date of birth BEAM-robotics November 10, 1989?I was basing this question on the message Brian O. Bush: […]
Mark Tilden on CBC Radio
Word is Mark W. Tilden gave CBC Radio a nice interview that'll be aired right after the 10am news on your local CBC station. Not Canadian? Use the internet to your advantage. Use this link to find the station closest to your time zone (or earlier or later if you wish), and tune in!
BEAM Tools - See What We Use
We asked Grant, our resident BEAM technician, to come up with a list of some of the tools he uses, and here we have it! This list will help those first starting out to see what they should use, and for those who've been doing it awhile we have some of our more advanced tools. […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.