Monday is Heritage Day here in Alberta, Canada, so we will all be out Heritage-ing it up, and enjoying our all too short summer. So if you want to go all Heritage on BEAM, and buy a SolarRoller kit, we'll ship it to you when we are back in the office Tuesday!
Propellor, Maker Faire
Dave Hrynkiw
May 8, 2009
Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.
But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:
- 63mm (2.5") long
- 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
- 1mm shaft hole diameter (easily drilled out to suit your motor)
It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!
MORE POSTS
Arduino Book...and the Pendulum Swing!
Here's a great booklet to accompany any new Freeduino purchase - "Getting Started with Arduino", written by Massimo Banzi (the co-founder of the Arduino Project). This title is based on his free-download introduction PDF, but takes is much farther, guiding new electronics enthusiasts into how to use the Arduino / Freeduino in a project. Also […]
Herbie the Mousebot and Photopopper 5.0 ...
After another marathon documentation-writing session, we're proud to announce that both "Herbie the Mousebot" and the "Photopopper 5.0" are in full production! Just in time for Christmas!
Project Monday: The Story of SharkBot
Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.