Propellor, Maker Faire

Dave Hrynkiw
May 8, 2009

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair  warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.

But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:2.55in Propellor

  • 63mm (2.5") long
  • 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
  • 1mm shaft hole diameter (easily drilled out to suit your motor)

It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!

MORE POSTS

December 12, 2007
Make was a blast... but now onto the Hol...

Wow, has it been that long already? The MAKEr Faire in Austin was beautiful, and interesting. Funny how we saw many Texans driving along with their windows up, while us two Canadians were wearing shorts with the top down on our rental. Interesting how people adjust to different climates! The MAKEr Faire wasn't quite as […]

November 4, 2015
Wednesday Links: Dancing Spiders, Protot...

Dancing Peacock Spiders with Lightsabers This is just fun to say, even more fun to watch (Via Nerdist). Turning a Tape Gun Into a Prototyping Machine Interesting idea, but not necessarily very practical (Via Makezine). A story-based Japanese Rube Goldberg Machine This Rube Goldberg machine features not only some amazing timing and clever solutions but […]

March 23, 2012
Bulbdial on Steroids - the Chinook Shado...

We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits […]

April 29, 2003
New Gearmotors!

We're very excited to announce these new "baby" versions of the popular GM2 and GM3 gearmotors. These junior versions offer a 120:1 gear reduction ratio, built-in safety clutch, and 146rpm with 20in*oz torque at 5V drawing onlyh 90mA (620mA at stall). Take a look at them in the motors section of our website! The new […]

1 15 16 17 18 19 254
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.