... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!): Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered […]
Propellor, Maker Faire
Dave Hrynkiw
May 8, 2009
Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.
But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:
- 63mm (2.5") long
- 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
- 1mm shaft hole diameter (easily drilled out to suit your motor)
It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!
MORE POSTS
New SCC3733a-MSE Solarcell
What's so special about the new SCC3733a-MSE? Two things: It's machine-assembled with new high-quality Russian solar cells (the best commercial cells we've tested yet) It comes with a Miller Solarengine circuit pre-etched on the rear of the solarcell! We have only a limited number of these cells presently, so if you're looking for the absolutely […]
New Inexpensive Gearmotors!
Woohoo! We're thrilled to announce that Solarbotics is the exclusive importer for these Mark Tilden-designed gearmotors. 224:1 ratio, lots of torque, modifiable - these are idea for high-torque applications like walkers and turbots. Check the "New Items" listing on the left side for details, or view them directly here: GM2 (offset) or GM3 (90 degree) […]
Wednesday Cool Links: Flying Tacos, Atom...
We are back to out regular Wednesday Cool Links, and to celebrate this occasion, we are treating you with more Wednesday Cool Links. I know, pretty original, right? Grant Imahara gets a taco by copter at RoboGames 2013 (Video) While RoboGames is an exciting event as is, being attacked by taco-slinging Hex-copters is a whole […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.