Propellor, Maker Faire

Dave Hrynkiw
May 8, 2009

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair  warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.

But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:2.55in Propellor

  • 63mm (2.5") long
  • 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
  • 1mm shaft hole diameter (easily drilled out to suit your motor)

It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!

MORE POSTS

January 17, 2018
New Product Post

3W Stereo Bluetooth Interface, 3.7~5VDC, FM / TF/ USB, IR $18.20CAD / $14.50USD We are impressed with this stereo Bluetooth v4.2 module with USB, SD card, or Bluetooth audio inputs and a remote control driving a 3W amplifier. 3W Stereo Bluetooth Interface, 3.7 ~ 5VDC $12.67CAD / $9.50USD A basic bluetooth speaker driver board, ideal […]

July 13, 2012
Introducting the CMDR Shield for Arduino

Last week we beefed up the Ardweeny with the Multipack, and this week we're turning out attention to the Arduino. We've just released the CMDR (Compact Motor Driver) Shield, which lets you bi-directionally drive two gear motors or a single stepper motor, read 6 analog sensors, and control up to 8 servos all at the […]

May 1, 2009
More PICAXE Goodness

Boy oh boy, it's been a busy week for PICAXE stuff. We actually got a big ol' shipment in late last week, which included the new 40X2 chips.  And by now we've receiveded everything, including even more X2 chips. But this time they're of the 28-pin variety. (Don't worry,  the 28X1's haven't gone the way […]

August 9, 2006
Another New Gearmotor - The GM19!

Here's a funky motor for you - the GM19! Slightly larger than the other metal gearhead series (GM11-14), and with a larger motor, this 35:1 beasty looks like a good contender for building mini-sumos or other small, speed-hungry robots! But be warned: It is a bit strange. The gearhead is mounted askew to the motor, […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart