Propellor, Maker Faire

Dave Hrynkiw
May 8, 2009

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair  warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.

But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:2.55in Propellor

  • 63mm (2.5") long
  • 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
  • 1mm shaft hole diameter (easily drilled out to suit your motor)

It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!

MORE POSTS

October 17, 2008
Austin Maker Faire 2008

It's that wonderful time of year when you can see your breath in the air while you wait at the bus stop. Frost decorates the blades of grass, motorists spend five minutes scraping ice off the windshield  before departing and there are hints of snow when you look up at the hills. So what's a […]

December 21, 2015
Monday New Product: Timing Belt & B...

GT2 Timing Belt, sold by meter $8.02 Sold by the meter up to 10M in length! If you want a 5M length, order 5. 608ZZ Double-Shielded Bearing, 8x22x7mm $1.07 For Bearings Sake! Let it slide! 693ZZ double-shielded bearing, 3x8x4mm $1.34 Friction Be Gone! These bearings will let you slide! MF83ZZ Flanged double-shielded bearing, 3x8x3mm $1.34 […]

November 28, 2011
Bundles o' Brains

What's worse than having to wait nine months? Having to wait a year and nine months. That's where we're finding ourselves, with Beakerhead here in Calgary aiming to land in September of 2013. Luckily, though, this festival of art fused with technology (think MakerFaire) will have a few smaller events between now and then. We […]

September 26, 2008
Egg-cellent Art

ArtBots 2008 was held on September 19-21 in the Science Gallery at the Trinity College in Dublin, Ireland. The show featured 15 works of art by 16 artists from 9 countries. Solarbotics Ltd was proud to provide several demo robots to the Science Gallery to use during ArtBots for their “hands-on” robot display. One of […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart