Project (the day other than) Monday: Ice...

Solar botics
December 3, 2014

Inspired by the Ice Bulb published on Instructables, we decided to create our own version. Ice bulb suggests that we use a balloon to shape the ice and before it freezes, add an LED so that it can glow. Since we decided to use a whole bunch of LEDs (on a string), we opted to use a silicon brownie mold for multiple "bulbs" in less conventional shapes instead.

If you decide to try this too, you will need wire cutters, wire, needle, silicone mold, and our 3 meter LED string of any colour (we chose a red-green-blue one). If you are wondering where to find the mold we used, you can find one at your local Michaels. If you can't find a silicone mold, you can try using a metal muffin tin instead but this could cause your ice cubes to crack when they freeze.

Step 1. Cut seven wire strips, about 2" long. They don't need to be good looking, this is just for holding the LED string down to prevent it from moving around and make sure it freezes in the right position. We found that none of the sticky materials like gaffers tape or packing tape actually stuck to silicone, not to mention holding something in place, so wire will work the best.

Step 2. Bend the wires into a U shape - better to do it beforehand than trying to hold the unruly LED string in place with one hand, wire cutters in other, needle in the third one, and the wire to cut in the fourth. You notice the tendency, right?

Step 3. Do some math to space your LEDs evenly on the string. We decided that we wanted a 5 LED space between our ornaments and on both ends. That means (90-(5 x 7 spaces=35))/6= 9 LEDs per cell.

   

Step 4. Count out your LEDs for the first cell and wrap them in a loose ball like shown. Hold them in place, make a lead hole in the silicone with a needle and pin the LED string down with your U-shaped wire. Twist it in the back to keep the wire locked in place.

Step 5. Continue until you fill all the cells with the LED string. Make sure to adjust the string so it sits nicely in each cell and does not touch the edges or stick out of the mold.

   

Step 6. Fill the mold with water: the string is water/weather resistant. If you want the light to be more uniform within the star, cloud some cells with milk or cream (add just a few drops).

Step 7. Now that all the stars are ready, stick them in the freezer for a few hours until they are solid ice. The battery pack should be fine in the freezer as well but just make sure that it isn't resting on anything wet.                                                                                 

Step 8. Take out your frozen goodies, power them on and enjoy!
You can also reuse the mold and make multiples - we made a red ornament as well.

MORE POSTS

April 16, 2014
Wednesday Links: Helical Springs, Electr...

Did you see the lunar eclipse on Monday night? I wish they had it rescheduled for Sunday afternoon, so all of us night-owls-who-have-to-get-up-early could watch that. But noooOOoOO. But at least the internet will save us. At least from information deficit. Laser Cut Helical Springs I wonder if zigzag helical springs can still travel down […]

July 12, 2007
Circuit: Herbie by Randy Sargent

Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!

October 18, 2004
Transistor turns 50!

Well, 50 years ago today, the Regency TR-1 transistor radio was unleashed on the masses. As the first transistor-based radio on the market, it made a splash. And here we are, 50 years later, making robots out of the same technology. Regenchy TR-1, Solarbotics salutes you!

November 4, 2015
Wednesday Links: Dancing Spiders, Protot...

Dancing Peacock Spiders with Lightsabers This is just fun to say, even more fun to watch (Via Nerdist). Turning a Tape Gun Into a Prototyping Machine Interesting idea, but not necessarily very practical (Via Makezine). A story-based Japanese Rube Goldberg Machine This Rube Goldberg machine features not only some amazing timing and clever solutions but […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart