Project (the day other than) Monday: Ice...

Solar botics
December 3, 2014

Inspired by the Ice Bulb published on Instructables, we decided to create our own version. Ice bulb suggests that we use a balloon to shape the ice and before it freezes, add an LED so that it can glow. Since we decided to use a whole bunch of LEDs (on a string), we opted to use a silicon brownie mold for multiple "bulbs" in less conventional shapes instead.

If you decide to try this too, you will need wire cutters, wire, needle, silicone mold, and our 3 meter LED string of any colour (we chose a red-green-blue one). If you are wondering where to find the mold we used, you can find one at your local Michaels. If you can't find a silicone mold, you can try using a metal muffin tin instead but this could cause your ice cubes to crack when they freeze.

Step 1. Cut seven wire strips, about 2" long. They don't need to be good looking, this is just for holding the LED string down to prevent it from moving around and make sure it freezes in the right position. We found that none of the sticky materials like gaffers tape or packing tape actually stuck to silicone, not to mention holding something in place, so wire will work the best.

Step 2. Bend the wires into a U shape - better to do it beforehand than trying to hold the unruly LED string in place with one hand, wire cutters in other, needle in the third one, and the wire to cut in the fourth. You notice the tendency, right?

Step 3. Do some math to space your LEDs evenly on the string. We decided that we wanted a 5 LED space between our ornaments and on both ends. That means (90-(5 x 7 spaces=35))/6= 9 LEDs per cell.

   

Step 4. Count out your LEDs for the first cell and wrap them in a loose ball like shown. Hold them in place, make a lead hole in the silicone with a needle and pin the LED string down with your U-shaped wire. Twist it in the back to keep the wire locked in place.

Step 5. Continue until you fill all the cells with the LED string. Make sure to adjust the string so it sits nicely in each cell and does not touch the edges or stick out of the mold.

   

Step 6. Fill the mold with water: the string is water/weather resistant. If you want the light to be more uniform within the star, cloud some cells with milk or cream (add just a few drops).

Step 7. Now that all the stars are ready, stick them in the freezer for a few hours until they are solid ice. The battery pack should be fine in the freezer as well but just make sure that it isn't resting on anything wet.                                                                                 

Step 8. Take out your frozen goodies, power them on and enjoy!
You can also reuse the mold and make multiples - we made a red ornament as well.

MORE POSTS

February 25, 2002
2002 LANL Workshop in the works...

Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]

March 19, 2003
WCRG 'Get Building' Sale

The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!

January 9, 2019
What's New At Solarbotics

We've added new products to our website! Here's a quick look! ESP-01 Programmer / Adapter Module Programming an ESP0-01 (or any other ESP8266 variant) can be a bit of a button-toggling dance even after you get it wired up correctly. This handy little module makes it so much easier, by making completely buttonless and comes with a usb connector […]

December 3, 2004
PDXBot 04 video - it's good!

Ok people, the sales on the PDXBot 04 DVD have been less-than-stellar. I brought them in primarily because I thought other people wanted to see robot competitions that you may not otherwise get to see. Also, a portion of the proceeds go to help the PARTS club in Portland Oregon. If you have a robo-geek […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart