After another marathon documentation-writing session, we're proud to announce that both "Herbie the Mousebot" and the "Photopopper 5.0" are in full production! Just in time for Christmas!
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.
Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:
We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.
Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.
Now take a look at our new cleaned and re-slatted table! It's almost too clean...
As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!
Using the laser to laser parts for the laser... for better lasering...
Here are the results:
With this in place, we're ready for even higher quality laser cutting.
After another marathon documentation-writing session, we're proud to announce that both "Herbie the Mousebot" and the "Photopopper 5.0" are in full production! Just in time for Christmas!
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
This is a quick note to announce our holiday schedule, which is going to be as follows: December 24 (Christmas Eve)- 9am to 12pm (half day) December 25 (Christmas Day) - offices are closed December 26 (Boxing Day) - offices are closed December 31 (The Day Before New Year's Day) - 9am to 12pm (half […]
Just a quick note to say that our office is closed Monday, October 8 for Canadian Thanksgiving. We'll be back to work on Tuesday!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.