Project: Switching Beds for a Better Cut

Dilan Tuff-Overes
August 9, 2018

We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.

Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:

  1. Is my project super heavy, or do I not care about table damage, scorching and just want a flat worksurface surface? (Use a flat metal tabletop)
  2. Are my parts small or risk being lost after being cut? (Use honeycomb)
  3. Do I want to minimize flash marks on my part? (Use slat)
  4. Am I doing the same thing over and over again and want best performance? (Use custom pin-table)

We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.

Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.

Now take a look at our new cleaned and re-slatted table! It's almost too clean...

As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!

Using the laser to laser parts for the laser... for better lasering...

Here are the results:

With this in place, we're ready for even higher quality laser cutting.

MORE POSTS

October 6, 2015
New Product: Grove, More Grove & Ko...

Seeed Grove - RTC $6.90 The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date, month and year information. Nidec SMD Vibra motor 1.3V DC, 105mA, 9500rpm $3.00 Surface-mount […]

July 15, 2003
Lower gear ratio motors!

We're happy to announce another variant of gearmotor. Like the GM2/GM3 but with a gear ratio of 143:1, they run approximately 175% the output speed! - these are ideal for applications like minisumos, linefollowers and other wheeled devices. Check the "New Items" listing on the left side for details, or view them directly here: GM8 […]

October 17, 2012
Wednesday Cool Links: Spiderbot, Solar S...

It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with […]

September 24, 2018
Server Issue Update

EDIT: Our wizards were successful and everything should be displaying properly now! Hi everyone, we've noticed that our website is having trouble with displaying images. We have our IT wizards working on it right now and should be back up and running like normal shortly! If you have any questions or concerns please email us […]

1 29 30 31 32 33 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart