Project: Switching Beds for a Better Cut

Dilan Tuff-Overes
August 9, 2018

We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.

Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:

  1. Is my project super heavy, or do I not care about table damage, scorching and just want a flat worksurface surface? (Use a flat metal tabletop)
  2. Are my parts small or risk being lost after being cut? (Use honeycomb)
  3. Do I want to minimize flash marks on my part? (Use slat)
  4. Am I doing the same thing over and over again and want best performance? (Use custom pin-table)

We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.

Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.

Now take a look at our new cleaned and re-slatted table! It's almost too clean...

As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!

Using the laser to laser parts for the laser... for better lasering...

Here are the results:

With this in place, we're ready for even higher quality laser cutting.

MORE POSTS

March 12, 2014
Wednesday Links: Sorting Algorithms, Wal...

Finally, the freezing temperatures are somewhat over, and the outside seems almost livable, as opposed to run-for-your-life-or-else-you-freeze-able. Our links also, no matter the season, stay well-selected and non life-threatening. Photosynthesis-based Table Table that harvests energy of the sun by Dutch designer Marjan Van Aubel, via Designboom. Visualizing Sorting Algorithms Sorting algorithms are always interesting to […]

March 20, 2013
Wednesday Cool Links: The Flying Stuff, ...

Solarbotics and the Useless Box have been mentioned in the Wall Street Journal article "Looking for Something Useful to Do With Your Time? Don't Try This"! It is dedicated to the historical overview of the uselessness starting with its invention in the 1950s to nowadays. The useless box can take many guises, names and materials […]

June 11, 2012
Project Monday: All-Seeing Eye

This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]

May 9, 2006
MAKE Magazine, Vol6...

Is on robots! Lots of BEAM Robots! Read More...

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart