Project: Switching Beds for a Better Cut

Dilan Tuff-Overes
August 9, 2018

We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.

Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:

  1. Is my project super heavy, or do I not care about table damage, scorching and just want a flat worksurface surface? (Use a flat metal tabletop)
  2. Are my parts small or risk being lost after being cut? (Use honeycomb)
  3. Do I want to minimize flash marks on my part? (Use slat)
  4. Am I doing the same thing over and over again and want best performance? (Use custom pin-table)

We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.

Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.

Now take a look at our new cleaned and re-slatted table! It's almost too clean...

As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!

Using the laser to laser parts for the laser... for better lasering...

Here are the results:

With this in place, we're ready for even higher quality laser cutting.

MORE POSTS

August 17, 2001
Spyder Detail Pictures

One of the most popular BEAM Walkers ever built was Mark Tilden's VBug 1.1 - Spyder. We've recently had the opportunity to shoot a series of high-resolution detail pictures of this robot, which we're now making available to you!

October 16, 2004
Sumovore Captures 1st at NAIT

From the BEAM mailing list, we're happy to report that Tom Gray managed to win 1st at the NAIT robotics challenge in Edmonton!: "Thanks again to all who endured my wails and made helpful suggestions earlier this year when I couldn't get my BS2 brained Sumovore to run. " "Grant M. of Solarbotics finally traced […]

June 28, 2011
New Things In The Pipe

Well ladies and gentlemen, I'm sure we can all say at this point that our current website is in need of a bit of love (we certainly think so). Now's your chance to speak up and tell us what kind of shiny new features you'd like to see implemented in the new site. We've already […]

September 26, 2008
Egg-cellent Art

ArtBots 2008 was held on September 19-21 in the Science Gallery at the Trinity College in Dublin, Ireland. The show featured 15 works of art by 16 artists from 9 countries. Solarbotics Ltd was proud to provide several demo robots to the Science Gallery to use during ArtBots for their “hands-on” robot display. One of […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart