There's still a bit of time left if you're dropping hints to your loved ones about what you want for Christmas! US Express -- December 22 (last chance!) Canada Express -- December 23
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.
Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:
We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.
Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.
Now take a look at our new cleaned and re-slatted table! It's almost too clean...
As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!
Using the laser to laser parts for the laser... for better lasering...
Here are the results:
With this in place, we're ready for even higher quality laser cutting.
There's still a bit of time left if you're dropping hints to your loved ones about what you want for Christmas! US Express -- December 22 (last chance!) Canada Express -- December 23
Seeed Grove - IMU 9DOF V2 $18.23 The Grove 9 degree-of-freedom (DOF) module features the MPU-9250, and is an easy-to-use all in one module from SeeedStudios. Teensy Prop Shield LC $13.00 The Prop Shield LC is the stripped-down version of the Teensy Prop Sensor Shield (motion sensors removed) Prop Shield With Motion Sensors $27.00 The […]
With the runaway success of the Useless Box, many of us here at Solarbotics can be assembling the kits in our sleep, even under a dose of tranquilizers, and be orchestrating the two lasers at the same time with no difficulty whatsoever. Just like I used to count transistors for the latest in Soviet Death […]
It's that wonderful time of year when you can see your breath in the air while you wait at the bus stop. Frost decorates the blades of grass, motorists spend five minutes scraping ice off the windshield before departing and there are hints of snow when you look up at the hills. So what's a […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.