Project Monday: Musical Gears

Dave Hrynkiw
June 10, 2013

Sometimes we get the opportunity to help out select people who are developing projects for a good cause. One of those things dear to our hearts is inspiring children with science and electronics. So when John Porter came to us looking for a hand to make a musical gear project as part of an exhibit at the Children's Museum of Pittsburgh, we threw him some of our support. John attends Carnegie Mellon University in the Masters of Science program, and was working with fellow classmates Daniel Pfaff and Arden Rosenblatt to make a project described as "the ‘Musical Gear’. A single powered gear would exist at the center of a table. Children would be able to place Musical Gears on the table and mate them to the powered gear. Sensors on the edge of the Musical Gear would be triggered by coming into contact with the other gears. This would cause the gear to produce a musical tone on an internal speaker. By building up a chain of gears, the child would be able to create a variety of musical beats while learning about motion transfer through gears."

They chose the Ardweeny as an ideal brain for the project - it proved to be compact and powerful enough to handle the behaviors they were after. "Once the brain of the Musical Gear was selected, the rest of the design quickly fell into place. It would be powered by a 9V battery through a linear voltage regulator. It would include the circuitry for a soft latch power switch so that it could turn itself off. A small audio amplifier was designed to boost the signal from the Ardweeny. We also selected a short range optical switch as the primary sensor on the gear, meaning there were no moving parts that could be broken."

"Exhibit deployment was a great success. The gears were robust enough that not even the hordes of children were able to destroy them. Unfortunately, however, the musical beats that we had envisioned did not come to fruition. Instead, it was three days of chaotic, incessant beeping. The kids really seemed to enjoy it, though, even if we weren’t creating the next Mozart. And while we enjoyed our exhibit as well, we were certainly glad to pull the batteries out at the end. Maybe the world isn’t quite ready for the Musical Gear yet."

John was kind enough to shoot and send some video our way which shows off what the gears looked like in motion as the kids played with them. I have to admit... I kind of really want to try it out myself.

If you'd like to know a bit more (and see a few more images), you can download a PDF right here that describes how the project was conceived and implemented. It's well worth the read, and looks like one of the more unique ways we've seen the Ardweeny put to use.

MORE POSTS

November 7, 2019
Lulzbot 3D Printer Documentation and Res...

Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]

July 12, 2007
Circuit: Stepper Motor

This is a neat little one-chip circuit we originally tuned for use with our "SM1" Stepper motors. We've presently sold out of the motor, but this circuit has proved to be a good unidirectional (1-way) driver for small stepper motors.

February 23, 2018
Project: APA102-2020 MicroNova Custom LE...

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we […]

June 25, 2013
Back on Track

Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart