Project Monday: LogoTurtleBot

Dave Hrynkiw
May 14, 2012

Question: What ever happened to punch cards? Nobody really knows, but the world became a much much darker place without them. There was something undeniably magical about making a computer do your bidding through feeding it a piece of paper with a bunch of holes in it ("THE ULTIMATE POWER IS MINE! I CAN NOW FIND OUT THE SUM OF TWO SINGLE-DIGIT NUMBERS!").

Lets Make Robots user isotope is bringing punch cards into the future. He has developed a drawing robot that it programmable by feeding it with black and white paper strips. Check it out:

Aside from the GMPW wheels and motors for muscle, the LogoTurtleBot is rocking a Freeduino SB and Protoshield for brains. isotope has done a lot of fantastic things with this build - aside from the obvious novelty factor (some might think programming via paper strips isn't be the most efficient system, but it scores some mega-awesome points with us), overall it's a well thought-out platform. Using CDs to construct the chassis, for example, was a creative piece of problem-solving and an effective decision. Even the finer elements, such as the feeder for the paper instructions, is a well-executed piece of engineering. Make sure you head on over to the project page and check out the handiwork!

MORE POSTS

January 17, 2017
New Product: Synapse & ESP

Synapse 220 Modules RF220SU SNAP Engine, 2 Mbps 2.4 GHz CAD40.43/USD29.95 WiFi is good, but the SNAP Engine Model RF220SU is an IEEE 802.15.4, low-power, very robust solution for embedded wireless control and monitoring networks. With auto-mesh networking (try that WiFi...). 2Mbps on the 2.4GHz spectrum and RP-SMA or U.FL selectable antenna. Synapse RF220UF1 CAD40.43/USD29.95 […]

September 8, 2016
Solarbotics' Grove Academic Education Bu...

Last summer during a Solarbotics Robotics for Educators session, one of the teachers noted something about many of the mainstream robotics and electronics learning platforms commonly used in classrooms. He said that those platforms suffered from the Black Box Effect. This effect was where the “black boxes,” the controllers, were plugged into the computer and […]

July 12, 2007
BEP Application: Pummer

The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.

June 21, 2007
New GMPW Wheels!

No more rubber band tires for us! We've invested in getting our very own wheels made for us, with molded-on thermoplastic rubber wheels! These wheels are slightly larger in diameter than the old style, measuring 69.2mm (2.72") diameter and 7.65mm (0.30") wide. Ah, but how good are they? They're definitely better than the old style! […]

1 … 7 8 9 10 11 … 254
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart