Project Monday: All-Seeing Eye

Dave Hrynkiw
June 11, 2012

Allseeing eye prototypeThis week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long range I2C-IT sensors and hooking them up to a Freeduino SB, BAM! INSTANT QUAD-DIRECTIONAL SENSOR ACTION! The module (called the All-Seeing Eye) is able to track distance (and motion) on each of the four sides. Here's a video we shot last week of it in action:

Because it's based on the SAFE, it's automatically compatible for mounting (and use) with both the DragonTail and Brutusbot. Check out more photos of it on our Flickr stream. In the meantime, we'll continue refining it to possibly release it as a bundle in the near future.

MORE POSTS

September 4, 2009
Labour Daybour, New PICAXE Items

Happy First Week of September everyone! The kids are all back in school and there's that certain holiday right around the corner. Apparently Labour Day celebrates "the economic and social achievements of workers." And what a better way to celebrate than to not work! That's right - on Monday, September the 7th Solarbotics and HVW […]

November 7, 2004
PDXBot Video

We just received an inventory of PDXBot.04 DVDs that we're selling in part to raise funds for the Portland Area Robotics Society (PARTS). It's a pretty hefty video - over 2 hours long, with many features, including a few cameos of "The Dave and Grant Show" (we were there competing last year). It's a good […]

October 14, 2011
Supernova of Electronics

Here at Solarbotics, we like to celebrate things. And today we're remembering a supernova that took place in the Ophiuchus constellation and was observed by German astronomer Johannes Kepler back in 1604. That poor star, it was taken before its time. So to commemorate the memory of that star, (aptly named SN 1604, but we […]

July 12, 2007
BEP Application: Servocore Walker

BEP02-Complete-120_2035.jpg
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.