As of early September the trees learned how to shed leaves. They were so graceful and efficient, that I start to wonder if they have an MFA in Shedding Leaves. Now, the question is - did they create this white stuff that now lies on the ground as well? Because if they did, they didn’t […]
Project Monday: All-Seeing Eye
Dave Hrynkiw
June 11, 2012
This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long range I2C-IT sensors and hooking them up to a Freeduino SB, BAM! INSTANT QUAD-DIRECTIONAL SENSOR ACTION! The module (called the All-Seeing Eye) is able to track distance (and motion) on each of the four sides. Here's a video we shot last week of it in action:
Because it's based on the SAFE, it's automatically compatible for mounting (and use) with both the DragonTail and Brutusbot. Check out more photos of it on our Flickr stream. In the meantime, we'll continue refining it to possibly release it as a bundle in the near future.
MORE POSTS
Maker Faire, Closed Mon. May 24th
Hey look, we're at Maker Faire! Hey look, we're at the Solarbotics Office! ... Hey look, we're like an amoeba, splitting in half to be in two places at once. Ok, here's the skinny - Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in […]
Black Friday/Cyber Monday Robot Sale
Something Old, Something New, Something... something... Solarbotics!(Happy Turkey Day!) Solarbotics Herbie the Mousebot v2 Kit No turkey here; just a fast robot mouse. Medium soldering skill necessary to build this flashlight-chasing mousebot. $40.00USD / $52.00CAD 25% OFF: $30.00USD / $39.00CAD Solarbotics Turbot Tumbling Robot Kit This medium-complexity retro BEAM Robotics light-seeking tumbling robot is back for […]
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.