Rubber Wheels
RW
1.15
USD
Qty
Price
1
$1.15 ea.
2+
$1.00 ea.
10mm Small rubber wheel with 1.5mm shaft hole. Ideal for solarollers!
Description [Hide]
Originally designed as capstan roller for cassette tapes (remember those), they've found a second life as high-performance wheels for tiny robots and in our own SolarSpeeder kit.
Specifications:
- 10mm OD
- 1.5mm ID
- 7mm wide
- Nylon hub
If you're planning to use these as coasting wheels, they roll quite nicely on standard 0.055" music wire. And our PRet plastic retainers do a good job of holding them in place.
You Might Also Like [Hide]
RPM2
Regular Pager Motor 2
These new, factory-fresh pager motors come ready-to-run: no eccentric weight removal necessary like on surplus pager motors!
$3.95 USD
PRet
Plastic Retainer
This plastic retainer friction-fits onto our RM1a motor. Ideal for making mini wheel hubs!
$0.25 USD
$0.25 USD
RM1A
Standard Motor
This "030" form factor motor replaces the old Mabuchi FF-030 we used to stock, and is still a good candidate for torquey Solarengine and small battery-powered robots.
$2.95 USD
K SV-PIC
Solarbotics Sumovore PIC Brainboard V2.0
Using one of the most popular styles of microcontrollers, this brainboard add-on replaces the standard discrete-logic brain with an established, powerful microcontroller! For use on select products.
$25.95 USD
K SV-Atmel
Solarbotics Sumovore Atmel Brainboard V2.0
This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)
$20.95 USD
K SV-BS2
Solarbotics Sumovore BS2 Brainboard
This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.
$15.95 USD
K TB
Solarbotics Turbot Tumbling Robot
The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!
$59.95 USD
SLED-RG-CC
Red / Yellow-green Common cathode LED
When you need two colours in one place, where do you look? Right here, and get a face full of red, then a yellow-green in a standard 5mm LED package.
$0.40 USD
52716
Stepper Motor with ZT-ASY-00101 Wiring Harness
This Nema 17 Stepper motor offers substantial holding torque at a low 2.8VDC. It's the same model as used in the Openbeam Kossel 3D printer.
$19.00 USD