Microchip PIC16F877A

PIC16F877A

7.95 USD
Qty
Price
1
$7.95 ea.

This is the Microchip PIC16F877A microcontroller that is used in our K SV-PIC Brainboard add-on.


Description [Hide]

Note: This item is slowly being phased out and is being replaced by PIC16F887.

This is the Microchip PIC16F877A microcontroller that is used in our K SV-PIC Brainboard add-on.

This is a common 8 bit microcontroller with a variety of useful peripherals

Specifications

  • 33 I/O lines
  • Eight 10-bit ADCs
  • Two PWM Channels
  • In-circuit programming
  • UART
  • Runs at 20MHz, 5MIPS

Documentation [Hide]

You Might Also Like [Hide]

22170

Servo - Medium

A simple, low-cost, high quality servo for all your mechatronic needs.

$10.95 USD

52262

1-Channel Relay Interface

Single channel optically-isolated relay board

$2.99 USD

52092

Raspberry Pi NoIR Camera Board v2 - 8 Megapixels

8MP Camera without Infra Red Filter for Raspberry Pi

$39.95 USD

52070

Teensy USB Board, Version 3.5 without Pins

PJRC did it again! Arduino compatible, 32bit, 120MHz ARM Cortex M4, and 5V tolerant to boot!

$24.25 USD

35010

Sensirion Temp/Humidity Sensor

The Sensirion Temp/Humidity Sensor is an efficient sensor that measure the ambient temperature and humidity of the surrounding area.

$44.99 USD

59050

Fosshape 300 Heat-formable fabric

Fosshape is a felt-like polyester fabric that is formable and pliable until it is exposed to heat that collapses it's structure and locks it into place.

$25.00 USD

17260

24LC16B Serial EEPROM

The 24LC16B is a16K Bits x 8 I2C serial EEPROM device.

$3.95 USD

15031

Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long

Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi

$2.75 USD

21038

SparkFun Pi Wedge (Preassembled)

The Raspberry Pi series of "single board computers" all have a 40-pin GPIO breakout, but it isn't breadboard friendly. Use the Pi Wedge to bring these lines out to your breadboard

$10.95 USD

14037

iOS TTL Serial Cable

This TTL Serial Cable is used in conjunction with the Redpark Software Develop Kit to create iOS apps that communicate with a serial device. Connects an iPhone, iPad or iPod touch to TTL serial devices like Arduinos, sensor modules, etc. at baud rates up to 57.6 Kbps.

$59.00 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!