Gear Motor Tread Cogs


2.25 USD
$2.25 ea.

Driver cogs to interface the GM2/3/8/9 gear motor with the GMT treads

Description [Hide]

These cogs let you interface our popular GM2/3/8/9 series gear motors with the very cool GMT tread links. They've been precision molded to mate with the gear motor's double-flat output shafts. They're so precise and snug, you might not even need to use the included mounting screw to lock the cogs on!

The GMTC Cog measures 38mm (1.5") diameter x 15mm (19/32") wide, and is made of the same long-life ABS plastic the tread links use.

Note: The cogs have an extremely tight fit on the GM8 & GM9. You may find filing the gearmotor output shaft down a wee bit a huge help to mounting the cogs.

You Might Also Like [Hide]


Gear Motor Tread Idlers

Idler wheels for the GMT tread links

$2.25 USD


Gear Motor Tread Links

These well-engineered tread segments are ideal mates for GM2/3/8/9 gear motor projects!

$1.00 USD


Gear Motor 9 - 143:1 90 Degree Shaft

This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!

$5.75 USD


Gear Motor 3 - 224:1 90 Degree Shaft

This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD


Adafruit Monochrome 128x32 OLED Graphic Display

These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1" diagonal, made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip.

$18.25 USD


BoE-Bot Tank Tread Kit

Customize your BoE-Bot for some serious off-roading with these rockin' new treads.

$34.95 USD


36k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD


Engineer's Mini Notebook (VOL II)

Volume II of the Forrest Mims Engineer's Mini Notebook series includes three popular notebooks: Science Projects; Environmental Projects; and Communications Projects.

$12.95 USD


PCBGrip Cylinder Accessory (4 pack)

This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!).

$6.00 USD


IESF-R-5 Pressure Sensor

The IESF-R-5 Pressure Sensor is a variable resistance sensor where the output resistance is proportional to the force applied to the bulb.

$9.95 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!