This 3300µF 6.3V electrolytic capacitor is the same as in our SunDancer kit. This value of capacitance gives adequately strong and frequent pulses in many solarengine circuits.

You Might Also Like ^[Hide]

CP1000uF

1000µF Electrolytic Capacitor

An unusually small 6.3 volt 1000uF capacitor, great for tight installations.

$0.80 USD

TR3904

2N3904 NPN Transistor

TR3904 NPN small signal transistor, as used in most basic solarengine designs.

$0.15 USD

D1

1N914 Silicon Diode

Standard 1N914 Silicon Diode for general purpose circuit design.

$0.10 USD

TR3906

2N3906 PNP Transistor

TR3906 PNP small signal transistor, as used in most basic solarengine designs.

$0.15 USD

SWT18R

12V 6A ON/OFF Waterproof Rocker Switch in Red

Apply power through this switch and it will give you waterproof illuminated control!

$3.95 USD

14037

This TTL Serial Cable is used in conjunction with the Redpark Software Develop Kit to create iOS apps that communicate with a serial device. Connects an iPhone, iPad or iPod touch to TTL serial devices like Arduinos, sensor modules, etc. at baud rates up to 57.6 Kbps.

$59.00 USD

R43K

43k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

60915

eSun 1.75mm Bronze PLA Filament - 0.5kg

1.75mm 0.5kg spool of bronze powder infused PLA filament, not recommended for nozzle sizes under 0.3mm. Probably a good idea to get some cleaning filament too.

$38.95 USD

50487

LilyTwinkle ATtiny85

A preprogrammed controller board that can make your wearable project sparkle and shine. You can control up to 4 LEDs with ease!

$4.95 USD

R8.2M

8.2M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

3300µF Electrolytic Capacitor

CP3300uF

Description ^[Hide]