eSun 1.75mm PLA+ Pink Filament - 1kg Spool

eSun is a top supplier of 3D printer filament, and we're happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you'll often see them represented at Maker Faires and 3D Printer Expos. We've even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.

In short, eSun knows their stuff. We're extremely happy with the quality and consistency of their material.

Features:

• Elongation at Break: 20%.
• Izod impact Strength (receiving a sharp blow): 6KJ/M²
• Density: 1.23g/cm^3
• Melt Index: 5g/10m (190℃/2.16kg)
• 60Mpa
• Bending Strength: 74MPa
• Flexural Modulus: 1973MPa
• Heat Distortion Temperature: 53°C
• Spool Length (1.75mm diameter): 340~345M

Specifications:

• Base chemistry: polylactic acid thermoplastic
• 1.75mm nominal diameter (spec'd +/- 0.05, but is in practice closer to +/- 0.03)
• 1kg spools on LARGE diameter (easy unspooling) reels, vacuum sealed with desiccant
• Suggested build parameters:
  • Print temperature: 210-230℃
  • Base temperature: 45~65 °C