SparkFun Thing Plus - SAMD51 SKU: 600797
SparkFun Thing Plus – SAMD51
$23.00 USD
Is it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of Sparkfun’s most powerful microcontroller boards yet!
In stock
Description
The SAMD51 Thing Plus provides you with an economical and easy-to-use development platform if you’re needing more power with minimal working space. This Thing even comes flashed with the same convenient UF2 bootloader as the RedBoard Turbo. To make the Thing Plus even easier to use, we’ve moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!
The ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features. In addition to the USB interface and Qwiic connection, The SAMD51 Thing Plus provides a 600mA 3.3V regulator and LiPo charger.
Features
- ATSAMD51J20 microcontroller
- 32-bit ARM Cortex-M4F MCU
- Up to 120MHz CPU speed
- 1MB flash memory
- 256KB SRAM
- Up to 6 SERCOM interfaces
- UF2 bootloader
- Qwiic connector
- USB interface for programming and power
- 600mA 3.3V regulator
- 4Mb (external) flash memory
- LiPo charger
- Feather pin layout
Documentation
More Info
Weight | 0.0015 kg |
---|---|
Dimensions | 6 × 2.5 × 0.75 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Solarbotics Stamp Stack II Microcontroller Kit
SKU: 25030The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.$35.00 USDIn stock
Add to cart -
AXE Stack-28 Starter Kit (USB)
SKU: 28621Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level using the PICAXE 28 and a USB Cable interface$84.09 USDAvailable on backorder
Add to cart -
Push Pogo Pin 3 – Chisel Point
SKU: PP3This 33mm (1.3") long poker-tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Push Pogo Pin 4 – Cup Tip
SKU: PP4This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Push Pogo Probe Holder – Style 40 size
SKU: PPH-40This is the holder for our now discontinued PP8S short pogo pins.$1.50 USDIn stock
Add to cart
Reviews
There are no reviews yet.