» Prototyping » Batteries » Power Adapters
Use this 2 pin panel mount DC jack to add a little polish to your next project.
Make your next project look like the real thing with this panel-mount 2.5mm DC jack. This 2-pin connector is a perfect addition to any case, 3D printed or otherwise.
Power that breadboard simply with this DC barrel jack.
Use this panel mount DC jack to add a little polish to your next project.
Yup... It's a DC power plug jack. Exciting stuff.
Marble Motion kit, enabled by Solarengine technology that keeps on moving even in low indoor light!
This adjustable buck converter takes a higher voltage and efficiently cuts it down between 1.23~30VDC, without wasting the power a linear regulator or resistor will.
Need a tidy DC-to-DC converter? This SparkFun breakout board offers 6 amperes of conversion, taking any DC voltage between 4.5-14VDC, and turning it to a selectable voltage between 0.59 and 5.5VDC.
This is a really nice power supply. It's a switching DC supply so its small and light and efficient. It is thin so it fits in power strips without blocking other outlets.
5V is a common voltage but there isn't much out there in terms of a high current 5V source. When you are in need of a 5V supply with immense strength; we strongly ask you to consider this unit.
Here's a different type of CR2032/CR2025/CR2016 battery holder, that has the cell clip into it from the top rather than the side.
Fosshape is a felt-like polyester fabric that is formable and pliable until it is exposed to heat that collapses it's structure and locks it into place. Fosshape 600 is double the weight of the 300.
Forgot Your Password?
Don't Have an Account?Sign Up!