Synapse RF300PC1 with Chip Antenna

51772

This Product Has Been Discountinued, This Page Is For Reference Only.

$26.00

USD

Qty
Price
1
$26.00 ea.

This Synapse Wireless 915 MHz RF wireless module runs at OTA (Over-The-Air) speeds up to 150Kbps and features tightly packed SMD construction with a chip antenna. These modules are perfect when you need a separate frequency band when already using 2.4GHz nodes in an application.


Description [Hide]

Synapse Wireless provides reliable RF Engines®that support a range of frequencies and bandwidths. These small, low-power, transceiver modules, commonly run in the 915MHz & 2.4GHz spectrums, have a maximum extended range of up to three miles LOS (Line-Of-Sight) and the lowest power consumption in the industry. These RF Engines come pre-loaded with the SNAP® network operating system which allows the nodes to be natively mesh networked. Typical applications include wireless serial port(s), sensor monitoring, actuator control, or an intelligent embedded controller - the possibilities are limitless. Synapse takes 802.15.4 Zigbee/XBee style communication one step further, and makes it smart.

This particular RF module includes a user programmable (via python-based scripts) embedded Silicon Labs Si1000 microcontroller that can be programmed for all kinds of applications including remote sensor monitoring, radio control, and/or peripheral activation.  Other notable features include: wide Low voltage TTL operating range (1.8 - 3.6V), 12 Analog-to-Digital Inputs, 4 Interrupt capable pins, I2C (TWI), SPI, 1 UART, & amazingly low power capabilities (8uA sleep current).

Feature List:

  • RF100 footprint compatible, pinout differs
  • Embedded Si1000 on-board
  • 1 UART port for LVTTL serial control or transparent data
  • Socket-able (2mm spacing) or solder-able
  • SNAP, instant-on, self-healing, mesh network operating system
  • 802.15.4 Protocol at 915 MHz
  • 24 pins, with 15 general purpose I/O, 12 of which can be 10-bit A/D inputs
  • 3 Interrupt capable pins
  • I2C communication (Pins 2, 3)
  • SPI communication (Pins 6, 7, 8)
  • 192k flash memory (64k available for user applications)
  • Embedded Python
  • Low power mode of
  • Can be used stand-alone (no additional microcontroller required)
  • Supply voltage: 2.7V~3.6V
  • Transmit Current: 85mA (Typ)
  • Receive Current: 18.5mA
  • Sleep Current: 8uA
  • Frequency Hopping (FHSS) technology resists noisy environments

Datasheet for RF300PC1:

We added a handy Synapse Module Comparison Chart, click on thumbnail to view a pdf:

Documentation [Hide]

You Might Also Like [Hide]

39255

Solarbotics Synapse Breakout Board Kit

Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.

$5.50 USD



39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD



51774

Synapse RF300PD1 with SMA Connector

A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.

$38.60 USD



51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD



21380

17 x 10 Mini Breadboard

Look! It's a 17x10 Mini Breadboard! Works great for prototyping, and not-so-great for cutting bread.

$3.95 USD



50828

SparkFun XBee Explorer Regulated

The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). This makes it SO much easier to start playing with XBee!

$9.95 USD



50632

SparkFun Bluetooth Mate

The Bluetooth Mate is very similar to the BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos.

$34.95 USD



16090

Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD



17195

Constant-Current 350mA LED driver

The linear constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost−effective solution for regulating current in LEDs.

$1.50 USD



28920

SB-Freeduino

The Freeduino is based on the open source project version of the Arduino Diecimila. We've adapted the design for more convenience as a semi-kit!

$26.00 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!