LilyPad Protoboard Large

50735

This Product Has Been Discontinued, This Page Is For Reference Only.

7.00 USD
Qty
Price
1
$7.00 ea.

This is a large board for prototyping through hole components with the LilyPad system. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don't want connected!


Description [Hide]

Want to make you own LilyPad circuitry? Here's the LilyPad large prototyping board for through hole components. It features an array of pins all shorted together with 10mil traces. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don't want connected! Standard 0.1" array.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:

  • 50mm outer diameter
  • Thin 0.8mm PCB

You Might Also Like [Hide]

Vibrating Disk Motor

VPM2

The VPM2 is a replacement for the now unavailable venerable VPM. At 12mm dia x 3.4mm thick, it's smaller than the original, and has presoldered leads!

$3.95 USD


Seeed Raspberry Pi Breakout Board v1.0

30310

The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your raspberry pi with other components and modules.

$11.50 USD


Synapse ProtoBoard (w/o module)

51754

The SN171 Synapse ProtoBoard is a very convenient way to connect any Synapse SNAP module to a RS232 port - ideal for playing with your new RF Engine!

$46.00 USD


Superflex 3m 90 LED Strand with 3xAA Battery Box

60660

Here's a simple battery-powered, portable and flexible LED string solution. 3 meter, ~3cm spacing, powered by 3AA cells. Ideal for quick "BLING" effect!

$10.95 USD


Super Carrier Board

21370

The Super Carrier Board is great for both the BASIC Stamp 1 and BASIC Stamp 2 Modules.

$19.95 USD


LilyPad Coin Cell Battery Holder

50485

If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.

$4.95 USD


ScrewShield for Arduino

51865

The ScrewShield is a “wing-format” shield that extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. (You even get a few bonus terminals for extra GND and power!&#

$10.00 USD


LilyPad Arduino 328 Main Board

50460

This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!

$21.95 USD


Seeed One Wire Temperature Sensor

29190

For simple and easy temperature measurement using the 1-wire protocol with a prepared DS18B20 sensor.

$5.90 USD


LilyPad LED Micro (5pcs)

5049x

Blinky lights, in all shapes and sizes, are always a good thing to have. These micro LilyPad LEDs cover the tiny end of the size spectrum, and come in white, red, yellow, blue and green.

$3.95 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!